Honda Remote Programming
This Video shows "Honda Remote Learning Process". It is applicable on nearly all the Honda Cars.
Here are the detailed steps:
1. Open Driver-side door and sit in the car.
2. Turn ignition ON with a key. Don't Start the Car only the ignition should be turned On.
3. Press Lock button on Remote to be programmed once
4. Turn-OFF the ignition
5. Repeat Step 2 to 4 for two more times
6. Turn ignition ON again (4th time)
7. Press Lock button again (4th time). You'll hear the sound of Central Locking confirming that it is in Remote Learning Mode.
8. Now immediately press Lock button on all the remotes (one by one) which are needed to be matched to this car. Any remote left at this point (Lock button not pressed) will not be matched.
9. Take out the key to end Remote Learning Mode.
10. Check all the remotes for operations.
Note:- If at Step 7, You didn't hear the central locking making any sound then the above procedure will fail and will not be applicable on that Honda car in particular
On this page of the site you can watch the video online Honda Remote Programming with a duration of hours minute second in good quality, which was uploaded by the user Flip Keys 09 May 2012, share the link with friends and acquaintances, this video has already been watched 249,039 times on youtube and it was liked by 670 viewers. Enjoy your viewing!
