Blinking an LED using Raspberry Pi and Python Programming
In this video, I will show you how to Blink an LED with Raspberry Pi using Python program i.e. turn on the LED for some duration and turn off the LED for some duration. RPi.GPIO Library and time module has been used in python programming to control the LED.
If you don’t have RPi.GPIO library then type the following commands in the Terminal to install it in your raspberry.
sudo apt-get update
sudo apt-get install rpi.gpio
The Components required are :
• Raspberry Pi (Any Model 2, 3, 4)
• Keyboard
• Mouse
• Monitor
• SD Card (Min. 16 GB)
• Breadboard
• GPIO Extension Board
• GPIO Extension Cable
• LED
• 220 Ohm Resistor
• Jumper Wires
Python Program :
import RPi.GPIO as GPIO
import time
Variables
LED_Pin_No = 17
Main_Loop_Condition = True
Main Function
def Main():
GPIO.setmode(GPIO.BCM)
GPIO.setup(LED_Pin_No, GPIO.OUT)
GPIO.output(LED_Pin_No, GPIO.LOW)
while Main_Loop_Condition:
GPIO.output(LED_Pin_No, GPIO.HIGH)
time.sleep(1)
GPIO.output(LED_Pin_No, GPIO.LOW)
time.sleep(1)
Function to Exit and release GPIO Pins
def Exit():
GPIO.cleanup()
Main_Loop_Condition = False
exit()
Main Program
if _name_ == "__main__":
try:
Main()
except KeyboardInterrupt:
Exit()
END ##
If you like this video, please press the like button and subscribe to my channel...
Thank You
In questa pagina del sito puoi guardare il video online Blinking an LED using Raspberry Pi and Python Programming della durata di ore minuti seconda in buona qualità , che l'utente ha caricato Innovation with Robotics 01 gennaio 1970, condividi il link con amici e conoscenti, su youtube questo video è già stato visto 67 volte e gli è piaciuto 5 spettatori. Buona visione!
