Python Serial Read on Pi
Download this code from https://codegive.com
Sure, I'd be happy to provide you with an informative tutorial on reading serial data in Python on a Raspberry Pi. Serial communication is often used for connecting peripherals, sensors, and other devices to a Raspberry Pi. For this tutorial, we'll assume you have a device connected to the Raspberry Pi via serial communication.
Before you start writing Python code, make sure your serial device is connected to the Raspberry Pi. This typically involves connecting the RX and TX pins of the device to the TX and RX pins of the Raspberry Pi, respectively. Also, connect the ground (GND) pins to ensure a common ground.
PySerial is a Python library for serial communication. If you don't have it installed, you can install it using the following command:
You need to know the serial port your device is connected to. You can find this information by using the following command:
This command will list the available serial ports, and you should see something like /dev/serial0 or /dev/ttyUSB0.
Create a new Python script, for example, serial_read.py, and open it in your favorite text editor. Add the following code:
Make sure to replace '/dev/serial0' with the actual serial port your device is connected to. Also, adjust the baud rate (9600 in this example) to match the baud rate of your serial device.
Save the Python script and run it:
You should start seeing the data received from your serial device printed on the terminal.
Congratulations! You've successfully created a Python script to read serial data on a Raspberry Pi. You can further enhance this script based on your specific use case, such as parsing the received data or triggering specific actions based on the data content.
ChatGPT
На этой странице сайта вы можете посмотреть видео онлайн Python Serial Read on Pi длительностью часов минут секунд в хорошем качестве, которое загрузил пользователь CodeFast 26 Ноябрь 2023, поделитесь ссылкой с друзьями и знакомыми, на youtube это видео уже посмотрели 12 раз и оно понравилось 0 зрителям. Приятного просмотра!
